Silver Content

40% Silver Kennedy Halves (1965-1970): Silver Content and Value

1965-1970 Kennedy half dollars are 40% silver with 0.1479 oz each. How they're made, how to identify them, the 1970-D, and melt value math at sample prices.

On this page
  1. The Short Answer
  2. Why the Half Dollar Kept Some Silver
  3. How a 40% Half Is Made
  4. Specifications Compared
  5. Year-by-Year Guide and Mint Marks
  6. How to Tell a 40% Half From a 90% or Clad Half
  7. Silver Content and Melt Value
  8. Which 40% Halves Are Worth More Than Melt
  9. Buying and Selling 40% Halves

The Short Answer

Kennedy half dollars dated 1965 through 1970 are 40% silver. Each coin weighs 11.50 grams and contains about 0.1479 troy ounces (4.6 grams) of pure silver. That’s less than half the silver in a 1964 Kennedy half, which is 90% silver, and far more than a 1971 or later half, which contains none.

For common circulated dates, value tracks the silver price:

Melt value per coin ≈ 0.1479 × silver spot price (per troy oz)

Why the Half Dollar Kept Some Silver

By the early 1960s, rising silver prices and a national coin shortage had pushed the Treasury to take silver out of circulating coinage. The Coinage Act of 1965 removed silver from dimes and quarters entirely and replaced it with copper-nickel clad. The half dollar was handled differently. Lawmakers kept some silver in it as a compromise, reducing it from 90% to 40%.

It didn’t work out as hoped. The Kennedy half was already a popular keepsake after President Kennedy’s assassination in 1963, and the remaining silver gave people another reason to hold on to it. Few 40% halves circulated widely. In 1971 the half dollar became fully clad, like the other coins. Our guide to silver in pre-1964 US coins covers the wider switch to clad.

How a 40% Half Is Made

A 40% Kennedy half is a clad coin, but with silver in every layer:

  • Outer layers: 80% silver, 20% copper
  • Core: roughly 79% copper, 21% silver

Overall, the coin works out to 40% silver. Because the outer layers are mostly silver, the faces look much like a 90% coin. The edge is where you can see the difference.

Specifications Compared

1964 Kennedy 1965-1970 Kennedy 1971 and later Kennedy
Composition 90% silver, 10% copper 40% silver (clad) copper-nickel clad over copper
Weight 12.50 g 11.50 g 11.34 g
Diameter 30.6 mm 30.6 mm 30.6 mm
Pure silver 0.3617 troy oz 0.1479 troy oz none
Edge solid silver silvery, with a faint gray line distinct copper stripe

Year-by-Year Guide and Mint Marks

The Coinage Act of 1965 suspended mint marks for several years, so halves dated 1965 to 1967 carry no mint mark wherever they were struck. Mint marks returned in 1968 and moved to the obverse, just below Kennedy’s bust. From 1968 to 1970, circulation strikes came only from Denver. San Francisco struck proofs for collectors.

Date Mint mark Approx. mintage (circulation strikes) Notes
1965 none about 66 million also issued in Special Mint Sets
1966 none about 109 million also issued in Special Mint Sets
1967 none about 295 million also issued in Special Mint Sets
1968-D D about 247 million 1968-S proofs also 40% silver
1969-D D about 130 million 1969-S proofs also 40% silver
1970-D D about 2.15 million issued only in mint sets; 1970-S proofs also 40% silver

There’s no Philadelphia business-strike half for 1968, 1969 or 1970.

The 1970-D

The 1970-D half was not released into circulation. It was sold only in that year’s uncirculated mint sets, with a mintage of about 2.15 million, far below the other dates. That makes it the key date among 40% circulation-strike halves, and it sells well above melt value, even in sets that have been broken up. This is also why many advertised “40% silver Kennedy sets” cover only 1965 to 1969. A complete 1965-1970 set needs a 1970-D, which costs more.

How to Tell a 40% Half From a 90% or Clad Half

  1. Check the date. 1964 or earlier is 90%. 1965 to 1970 is 40%. 1971 or later is clad, except for collector-only silver issues.
  2. Look at the edge. A 90% half has a solid silvery edge. A 40% half looks mostly silvery with a faint darker line in the middle. A clad half shows an obvious copper-colored stripe.
  3. Weigh it. A scale that reads to 0.01 g separates all three: 12.50 g for 90%, 11.50 g for 40% and 11.34 g for clad. Allow a little less for worn coins.

The difference between 11.50 g and 11.34 g is small, so a cheap kitchen scale may not show it reliably. A pocket jewelry scale is better.

Silver Content and Melt Value

Two 40% halves make $1 in face value, so $1 face value holds about 0.2958 troy ounces of silver. A standard roll of 20 halves ($10 face value) holds about 2.958 troy ounces.

Quantity Silver content At $30/oz At $50/oz At $70/oz
1 half 0.1479 oz $4.44 $7.40 $10.35
$1 face value (2 halves) 0.2958 oz $8.87 $14.79 $20.71
1 roll (20 halves, $10 face) 2.958 oz $88.75 $147.92 $207.09

These figures use the as-struck silver weight. Silver prices change daily, so use the current spot price for a live figure. Our junk silver value guide shows how 40% halves compare with 90% coins and war nickels by face value.

Which 40% Halves Are Worth More Than Melt

Most circulated 1965 to 1969 halves are common and sell close to their silver value. The exceptions are mostly coins made for collectors and coins in exceptional condition.

Special Mint Sets and Proofs

No proof sets were made from 1965 to 1967. Instead, the Mint sold Special Mint Sets (SMS) with coins of better-than-normal quality, including a 40% half. From 1968 to 1970, San Francisco proofs (1968-S, 1969-S and 1970-S) were also 40% silver. Most SMS and proof halves are not rare, but they usually sell for at least their silver value plus a modest premium. Exceptional examples, such as proofs with deep cameo contrast, can bring much more.

High-Grade Coins and Varieties

Circulation strikes from this period often show bag marks and weak strikes. Coins graded in the top uncirculated grades can be scarce for some dates and command strong premiums. Collectors also look for die varieties, including doubled dies, which are best confirmed with a variety reference or by a grading service.

40% Bicentennial Halves

The dual-dated 1776-1976 Bicentennial half dollar was struck for circulation in clad metal. The San Francisco Mint also struck 40% silver versions, with an S mint mark, for collector sets only. They have the same 40% silver composition and silver weight as 1965 to 1970 halves. They’re sometimes found mixed in with ordinary halves, so it’s worth checking any S-mint Bicentennial half by weight and edge.

Buying and Selling 40% Halves

  • Expect them to be priced separately. Dealers usually quote 40% halves per coin or per dollar of face value, separately from 90% silver. A “junk silver” lot that includes them holds less silver than its face value suggests.
  • Pull out the keepers first. Before selling by weight, set aside any 1970-D, SMS or proof coins, and any uncirculated pieces in original sets.
  • Check suspicious lots. Common 40% halves are rarely counterfeited, but it’s still worth weighing coins bought from unknown sellers. Our guide to testing for fake silver coins covers what to check.

Kennedy halves dated 1965 to 1970 were the last US half dollars with any silver struck for circulation. Together with the silver war nickels of 1942-1945, they make up the US partial-silver circulating coins.

The complete guide to silver content

Silver in US Coins Before 1964 and the Switch to Clad
Read the guide

Keep exploring

Guides from other topics

All topics →