Mercury dimes at a glance
The “Mercury” dime was struck from 1916 to 1945. Its official name is the Winged Liberty Head dime. Designer Adolph A. Weinman showed Liberty wearing a winged cap, and the public mistook her for the Roman god Mercury. The reverse shows a fasces (a bundle of rods around an axe) with an olive branch.
- Common dates are worth about their silver value or a little more when worn.
- Key dates like the 1916-D sell for hundreds of dollars or more even when heavily worn.
- Uncirculated coins with Full Bands can be worth many times the same coin without the designation.
The values below are rough guides drawn from published price guides and reported sales. Check a current guide from PCGS, NGC or Greysheet for exact figures.
Silver value: the floor for every Mercury dime
Every Mercury dime is 90% silver and 10% copper and weighs 2.5 grams. Each contains about 0.0723 troy ounce of pure silver. To estimate melt value, multiply 0.0723 by the current spot price of silver. For example, at $30 an ounce, the silver is worth about $2.17.
Worn common-date Mercury dimes often sell at or slightly above melt. Dealers who buy them in bulk usually treat them as “junk silver” and quote a price as a multiple of face value, based on the silver price.
Mercury dime value chart: key dates
| Coin | Mintage | Circulated (Good–Fine) | Uncirculated (MS60–MS63) |
|---|---|---|---|
| 1916-D | 264,000 | Roughly $700–$2,000 | Roughly $10,000 and up |
| 1921 | About 1.23 million | Roughly $50–$200 | Roughly $1,000 and up |
| 1921-D | About 1.08 million | Roughly $70–$250 | Roughly $1,000 and up |
| 1942/1 overdate | Part of the 1942 mintage | Roughly $500–$1,000 | Several thousand dollars and up |
| 1942/1-D overdate | Part of the 1942-D mintage | Roughly $500–$1,000 | Several thousand dollars and up |
The 1916-D is the key date of the series. Denver struck only 264,000 Mercury dimes in the first year of the design. That’s a tiny fraction of the Philadelphia mintage.
The 1942/1 and 1942/1-D are overdates. The dies were made with hubs bearing two different dates, so traces of a 1 show under the 2. Our doubled die coins guide explains how overdates and doubled dies are made.
Semi-key dates
| Coin | Mintage | Circulated (Good–Fine) | Notes |
|---|---|---|---|
| 1926-S | About 1.52 million | Roughly $15–$40 | Hard to find well struck |
| 1931-D | About 1.26 million | Roughly $10–$30 | Low-mintage Depression date |
| 1931-S | About 1.80 million | Roughly $10–$30 | Low-mintage Depression date |
| 1916-S, 1917-D, 1917-S | Several million each | Above melt | Premiums grow in better grades |
| 1919-D, 1919-S, 1920-D, 1920-S, 1924-D, 1924-S, 1925-D, 1925-S, 1927-D, 1927-S | Several million each | Above melt | Scarce in high grades and with Full Bands |
Common dates
| Date range | Typical worn value | Typical uncirculated value |
|---|---|---|
| 1916 (Philadelphia) | Above melt | Tens of dollars |
| 1934–1945 (most dates) | About melt | A few dollars to tens of dollars; more with Full Bands |
| Late 1910s and 1920s Philadelphia dates | Somewhat above melt | Tens of dollars and up |
The 1940s dates were struck in large numbers and are easy to find. They make an affordable way to own a classic US silver coin.
What “Full Bands” means and why it matters
On the reverse, the fasces is wrapped by horizontal bands: one at the center and others near the top and bottom. On a sharply struck coin, the center bands are fully separated, with a clear split running all the way across. When that split is complete and unbroken, both PCGS and NGC can add the Full Bands (FB) designation to the grade.
Many Mercury dimes were struck with too little pressure, so the center bands blend together. As a result:
- For common 1940s dates, an MS65 FB coin can be worth several times an MS65 without Full Bands.
- For some dates that were usually weakly struck, Full Bands examples are genuinely rare. The 1945 (Philadelphia) is the best-known case: common without Full Bands, but very scarce and valuable with them.
- Full Bands apply only to uncirculated coins. On worn coins, wear erases the bands.
To check, tilt the coin under a bright light and look at the center bands with a 5x to 10x magnifier. Any merging, flatness or break in the split rules out Full Bands.
Where to find the mint mark
On Mercury dimes the mint mark is on the reverse, at the lower left, just to the left of the base of the fasces, near the O in ONE.
- No letter: Philadelphia
- D: Denver
- S: San Francisco
For other coins, see our guide to mint mark locations.
How to grade a Mercury dime
Check these high points, which wear first:
- Liberty’s hair and the wing feathers on the obverse. Clear separation in the wing feathers suggests Very Fine or better.
- The fasces bands and the diagonal lines on the rods on the reverse.
- The rim and lettering. On Good coins, the rim may be worn into the letters.
- Luster. Uncirculated coins show original cartwheel luster when tilted.
Avoid cleaned coins. Mercury dimes are often polished to look bright, which leaves fine scratches and an unnatural shine. Cleaned coins sell for much less.
Spotting a fake 1916-D
The 1916-D is the most counterfeited Mercury dime. The most common fake is a genuine 1916 Philadelphia dime with a D added, either glued on or cut from another coin. Wholly counterfeit coins also exist.
- Check the D under magnification. It should blend naturally into the field, with no seam, glue line or discoloration around it.
- Compare its shape and position with photos of an authenticated 1916-D. The genuine D has a specific style and placement.
- Check the date. Some fakes are later dates with the digits tooled to read 1916. The digits should match the style and spacing of a genuine 1916.
- Buy certified. For a coin this valuable, a PCGS or NGC holder is the safest option.
For other silver coins and key dates, see the Barber coin values guide, which covers the dimes struck before Mercury dimes, and the old US coins value chart.